NCast Presentation Recorder Reference Manual
3.6. S
TATUS
B
AR
The Status Bar at the bottom of the page creates a real-time report of the activity underway and has
indicators for Streaming and Recording operations, Audio levels and the state of the selected Main, PIP
and Dual input signals. This example shows Dual Channel streaming, recording and capture.
Clicking the righthand grey panel collapses the Bar and hides it from view.
3.7. C
ONTROL
I
CONS
The upper righthand corner of the page contains two Control Icons:
Clicking the green arrow expands the slider to reveal an additional set of Icons:
The function of these Icons (left to right) is listed below.
3.7.1.
Reboot
Restarts the unit and reinitializes all processes. This operation may be needed to clear problems after a
power brownout or other unexpected glitch
3.7.2.
Shutdown
Powers down the encoder. It is HIGHLY recommended to power off the equipment with this Icon rather
than simply pulling the plug. All operating parameters will be properly saved and restored.
3.7.3.
Factory Defaults
Restores all Channels and other settings to their factory default. All configuration information will be lost.
Nothing is saved and the reset is irreversible.
3.7.4.
Export Settings
Once a recorder has been setup and configured, it's highly recommended to export all settings to save
the configuration of the unit for easy restore or repair.
Clicking the Export button will create and download a .zip file with all of the checked information.
NCast Corporation
Revision 1.0
Page 20
