NCast Presentation Recorder Reference Manual
The "
What
" field (Title shown above) must contain (anywhere in the field) the letters “PR720” to identify
this as a Presentation Recorder event. Additional words can further describe the nature of this entry
(e.g., “Chem 101”, “Weekly Staff”, etc.).
The "
When
" field (Dates shown above) is used to delimit the start/stop times for the event. The drop-
down menu only shows hour/half-hour entries, but by clicking again on the time field arbitrary times may
be entered. The repeat options allow multiple occurrences of this event. If a stop time of 11:00 am is
listed, the program uses 10:59:59 as the actual stop time. Thus, events may be scheduled back-to-back.
The "
Where
" field is the DNS name or IP address of the Presentation Recorder to be controlled. Only
one Presentation Recorder may be listed. This allows one calendar to control many different units.
The “
Calendar
” field must be the primary or default calendar for this account.
The “
Description
” field is a series of serial IP commands to be issued to the Presentation Recorder at the
time of the Start event (see below). In the example above, “C1” starts the Presentation Recorder session
on Channel 1.
6.7.6. Scheduled Event Commands
The “
Description
” or content field is a series of serial IP commands to be issued to the Presentation
Recorder at the time the Start event is processed. Each command is terminated with a ";" character. For
example:
C10;
This is the only command needed to start a Presentation Recorder ("Start on Channel 10 with all other
settings unchanged"). A more complicated example:
G3; V1; p1; C8; R1; RP,The CEO; RT,Weekly Performance Review;
where:
G3 Set the Main input to the VGA input connector
V1 Set the PIP input to the Composite video input connector
p1 Turn PIP on
C8 Start session on Channel 8
R1 Turn recording on
RP Set presenter information to "The CEO"
RT Set title information to "Weekly Performance Review"
NCast Corporation
Revision 1.0
Page 61
