Service Manual Chapter3. User Handling Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
3-13
Touch Screen
► Mechanical Specifications
1. Input Method : Finger
2. Environment
- Operation temperature : from -25
℃
to 70
℃
(from -13
℉
to 158
℉
)
- Storage temperature : from -30
℃
to 80
℃
(from -22
℉
to 176
℉
)
USB / RS232 / I2C Type Controller
Input Voltage
3.5V~5.5V.Typical 5V.
Interface
USB: 1.1 Full Speed
(12Mbps)
Resolution
2048 X 2048 resolution
Power consumption
Active Mode: Max 50 mA
Idle Mode : 5mA
Sleep Mode :0.5mA
Response time
Max. 20 ms
► Handling Remarks
SUBJECT
NOTE
Storage
▪ Store the products at the temperature and humidity range
presented in the specification.
▪ Store the products in the state of package.
Unpacking
▪ Do not hold FPC tail to take out touch panels in the package.
Handling
▪ Use gloves and finger coat to prevent stains on the touch panel
and injury by the sharp edge of the touch panel.
▪ Do not take hold of FPC tail when handing the touch panel.
▪ Do not pile up touch panels.
▪ Do not put anything on the touch panel.
▪ Do not fold the FPC tail.
▪ Clean off the touch panel with alcohol and a soft clothes when
necessary
▪ Prevent alcohol from penetrating into the touch panel.
▪ Do not use organic solvents except for alcohol.
Assembly
▪ Avoid excessive force on the touch panel.
▪ Do not give unnecessary strain to the FPC tail while assembling.
Operation
▪ Do not operate touch panel by applying excessive force.
▪ Do not use a sharp thing for input.
