Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-27
►CS2 (Reject/retract Box Docking Sensor)
1. Remove the Electronic Control Board assembly (*Refer to 1) Electronic Board
assembly)
2. Loosen the M3 fixing screw (2 places) of Sensor Bracket.
3. Disconnect the connector and remove the cable tie to remove the Sensor Bracket.
Be careful not to break the connector pin when removing.
4. Loosen the M3 sensor fixing screw (2 places) from the removed sensor supporter.
5. Replace the sensor and then assemble in the reverse order of 3~1.
<Note!>
Adjust cassette position when mounting it so that you can hear click sound
from the switch.
