Service Manual Chapter6. Control Electronics
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
6-13
D. Inserting the Package
▪ Grasp the package. Ensure to grasp on the edge of the substrate.
▪ Make sure pin 1 indicator is on your bottom-left side.
▪ Aim at the socket and place the package carefully into the socket by purely
vertical motion.
E. Closing the Load Plate
▪ Rotate the load plate onto the package IHS (Intergraded Heat Spreader).
▪ Engage the load lever while pressing down lightly onto the load plate.
▪ Secure the load lever with the hook under retention tab.
F. Fasten the cooling fan supporting base onto the CPU socket on the motherboard.
