Datasheet
The Sure Cross
®
wireless system is a radio frequency network with integrated I/O that operates in most environments to eliminate
the need for wiring runs.
•
Wireless industrial I/O device with two configurable asynchronous counter inputs and
four NMOS outputs
•
Selectable transmit power levels of 250 mW or 1 Watt for 900 MHz models and 65 mW
for 2.4 GHz models
•
DIP switches for user configuration
•
Frequency Hopping Spread Spectrum (FHSS) technology ensures reliable data delivery
within the unlicensed Industrial, Scientific, and Medical (ISM) band
•
Transceivers provide bidirectional communication between the Gateway and Node,
including fully acknowledged data transmission
•
Lost RF links are detected and relevant outputs set to user-defined conditions
•
Field-wireable terminals for wiring I/O
Important: Please download the complete Performance Gateway or Node technical documentation, available in
multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings,
and installation instructions of this device.
Important: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los
Performance Gateway or Node, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones,
advertencias, y las instrucciones de instalación de estos dispositivos.
Important: Veuillez télécharger la documentation technique complète des Performance Gateway or Node sur
notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes
de sécurité et les instructions de montage.
WARNING:
•
Do not use this device for personnel protection
•
Using this device for personnel protection could result in serious injury or death.
•
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-
energized (off) output condition.
Important:
•
Never operate a 1 Watt radio without connecting an antenna
•
Operating 1 Watt radios without an antenna connected will damage the radio circuitry.
•
To avoid damaging the radio circuitry, never apply power to a Sure Cross
®
Performance or Sure Cross
MultiHop (1 Watt) radio without an antenna connected.
Important:
•
Electrostatic discharge (ESD) sensitive device
•
ESD can damage the device. Damage from inappropriate handling is not covered by warranty.
•
Use proper handling procedures to prevent ESD damage. Proper handling procedures include leaving
devices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and assembling
units on a grounded, static-dissipative surface.
Models
Model
Frequency
Inputs and Outputs
DX80N9X1S-P16E
900 MHz ISM Band
Inputs: Two configurable asynchronous counters
Outputs: Four NMOS
DX80N2X1S-P16E
2.4 GHz ISM Band
Sure Cross
®
Performance Universal Counter
P16E Node
Original Document
199134 Rev. D
8 November 2019
199134
