background image

Datasheet

The Sure Cross

®

 wireless system is a radio frequency network with integrated I/O that operates in most environments to eliminate

the need for wiring runs.

Wireless industrial I/O device with two configurable asynchronous counter inputs and

four NMOS outputs

Selectable transmit power levels of 250 mW or 1 Watt for 900 MHz models and 65 mW

for 2.4 GHz models

DIP switches for user configuration

Frequency Hopping Spread Spectrum (FHSS) technology ensures reliable data delivery

within the unlicensed Industrial, Scientific, and Medical (ISM) band

Transceivers provide bidirectional communication between the Gateway and Node,

including fully acknowledged data transmission

Lost RF links are detected and relevant outputs set to user-defined conditions

Field-wireable terminals for wiring I/O

Important: Please download the complete Performance Gateway or Node technical documentation, available in

multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings,

and installation instructions of this device.

Important: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los

Performance Gateway or Node, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones,

advertencias, y las instrucciones de instalación de estos dispositivos.

Important: Veuillez télécharger la documentation technique complète des Performance Gateway or Node sur

notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes

de sécurité et les instructions de montage.

WARNING:

Do not use this device for personnel protection

Using this device for personnel protection could result in serious injury or death.

This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-
energized (off) output condition.

Important:

Never operate a 1 Watt radio without connecting an antenna

Operating 1 Watt radios without an antenna connected will damage the radio circuitry.

To avoid damaging the radio circuitry, never apply power to a Sure Cross

®

 Performance or Sure Cross

MultiHop (1 Watt) radio without an antenna connected.

Important:

Electrostatic discharge (ESD) sensitive device

ESD can damage the device. Damage from inappropriate handling is not covered by warranty.

Use proper handling procedures to prevent ESD damage. Proper handling procedures include leaving
devices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and assembling
units on a grounded, static-dissipative surface.

Models

Model

Frequency

Inputs and Outputs

DX80N9X1S-P16E

900 MHz ISM Band

Inputs: Two configurable asynchronous counters
Outputs: Four NMOS

DX80N2X1S-P16E

2.4 GHz ISM Band

Sure Cross

®

 Performance Universal Counter

P16E Node

 

 

Original Document

199134 Rev. D

8 November 2019

199134

Содержание Sure Cross P16E Series









Отзывы: