Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-15
► CS11T(A,B), CS21T(A,B), CS31T(A,B), CS41T(A,B)
1. First, remove the Bill Empty Detection assembly at Bill Empty Detection Sensor.
2. For easy disassembly, cut a couple of connected cable ties around there.
3. Remove three M4 screws at both sides as shown in the figure below.
4. Remove a couple of connectors and cables to remove the Sensor Bracket Assembly.
Be careful not to break the connector pin when removing.
5. Remove the Sensor Bracket Assembly.
6. From the removed Sensor Bracket Assembly, remove the M3 sensor screws (1
place each) of the sensor which will be replaced.
7. Replace the sensor and then assemble the unit in the reverse order - 6~1.
