Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-8
Sensor
► Inside the cash dispenser, various types of sensors having different functions and roles
are embedded. While some of the sensors look identical, their roles are still different,
which requires a careful attention.
Photo Transmitted Sensor (Separating type)
Photo Transmitted Sensor (Coupling type)
Photo Reflecting Sensor
Micro Switch
Magnetic Sensor
Normally, sensor consists of two kinds of components
Sending a signal : LED (Light Emitting Diode)
Receiving a signal : Tr (Transistor)
The separating type transmitted sensor in the Transport path has LED (Labeling:”D”) at
the bottom and Tr (Labeling:”T”) at the top to minimize the impact of external solar light
and dust. It is important not to change the assembly direction of LED and Tr during the
disassembly or replacement process.
Also, two sensors are placed in parallel in one Sensor Bracket.
► The name and functions of each Sensor can be summarized as below.
No
Symbol
Name
Description
1
CS 1
Reject Box Jam Detection Sensor
2
CS 2
Reject Box Docking Sensor
3
CS 3
Gate Operation Sensor
4
CS 4
Gate Operating Criteria Sensor
5
CS 5
Double Note Detection Sensor
6
CS 6, 7
Cam Detection Sensor
7
CS 8
Main Motor Encoder Sensor
8
CS 9
Retract Box Full Sensor
9
CS 10
Stacker Bill Detection Sensor
10
CS 13
Bill Counting Sensor
11
CS 14
Upper Transport Jam Sensor
12
CS 15
Bill Withdrawal Detection Sensor
13
S1, S2
Shutter Open/Close Sensor
14
CS 11,21,31,41
Cassette Outlet Jam Detection Sensor
15
CS 12,22,32,42
Cassette ID Sensor
16
CS 16,26,36,46
Cash Low Sensor
17
CS 17,27,37,47
Cassette Docking Sensor
18
CS 18,28,38,48
Bill Empty Detection Sensor
19
CS 19,29,39,49
Clutch Encoder Sensor
