Service Manual Chapter7. Cash Dispenser Unit
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
7-24
► CS8 (Main motor encoder sensor)
1. Loosen the M4 fixing screw of the CS8 Sensor Bracket (1 place).
2. Disconnect the connector and remove the cable tie to remove the Sensor Bracket.
Be careful not to break the connector pin when removing.
3. Press the pa
rt ‘B’ of the sensor softly as shown in the below figure to remove the
lock and the sensor.
4.
To insert the sensor, insert the part ‘A’ first and press the part ‘B’ to lock.
5. Assemble this in the order of 3~1
.
