natus OLYMPIC SMART SCALE 50, Инструкция по эксплуатации

Страница: 21 / 64

OLYMPIC SMART SCALE Model 50/51 Instruction Manual 3-3
Operating the Smart Scale
Adjusting the Platform Ends
To adjust the platform ends:
„
While holding the platform end press the large red button labeled
PUSH TO
UNLATCH
(see Figure 3.2), then gently lower the platform end to the full-down
position.
„
To return an end to the full-up position, lift the end until it locks into place and
LATCHED appears on the button’s rim (see Figure 3.3).
Figure 3.2
Adjusting the platform ends
Figure 3.3
Locking the ends into position
NOTE
#
Lower one or both ends to accommodate the patient being weighed. Whenever possible,
at least one platform end should remain up to help confine the patient.
CAUTION
„
Keep the platform ends in either the full-down or full-up positions. Ends are locked in
the full-up position only when
LATCHED appears (see Figure 3.3).
„
Do not allow the patient to sit or stand on the platform ends.
Hold the end
Then, push the red button to release the end
Platform end
The end is only locked in the “up”
position when
LATCHED appears.
Red button