natus OLYMPIC SMART SCALE 50, Инструкция по эксплуатации

Страница: 15 / 64

OLYMPIC SMART SCALE Model 50/51 Instruction Manual 2-3
Installing the Smart Scale
To attach the scale on the cart:
1
Place the scale on top of the cart, then open the cabinet door of the mobile base.
2
Using the probe, align the four threaded holes in the scale (see Figure 2.2) with
the four mounting holes in the top of the cart (see Figure 2.3).
3
Inside the cart, place the washers on the mounting screws, then insert the
mounting screws through the mounting holes in the cart (see Figure 2.3) and
tighten until the scale is securely attached.
4
Remove the backing from the caution label, which is included with the
mounting hardware, then press the label above the “Summary Instructions”
on the back panel of the scale (see Figure 2.3).
Figure 2.2
Bottom of Smart Scale — threaded holes
Figure 2.3 Installing the scale on the base
Threaded
holes for
mounting on
cart
Place the caution label here
Mounting holes (x4)
Inside the cart, place
the washers, then insert
the mounting screws
(x4) through the
mounting holes (x4).
Cabinet door