natus OLYMPIC SMART SCALE 50, Инструкция по эксплуатации

Страница: 22 / 64

3-4 OLYMPIC SMART SCALE Model 50/51 Instruction Manual
Operating the Smart Scale
Weighing the Patient
Kilograms/Pounds-Ounces
When the scale is first turned on, it shows the weight in the last-used units. To
change the display weight, press
KG/LB
. Kilograms display to 0.02 kg.
Zeroing the Weight of Objects
The weight of objects, such as blankets, can be zeroed (i.e., tared out, canceled) to
ensure that the patient weight is accurate.
To tare a weight:
„
If the scale is on, place the object on platform, then press
ZERO
.
„
If the scale is off, place the object on the platform, then press
ON/OFF
.
Patient Still, Not Moving
If the patient remains still, the weight appears on the display.
Patient Active, Moving
If the patient is active and the weight shown changes rapidly, press
AVERAGE/UNLOCK
. The AVERAGING light blinks while the Smart Scale
averages the patient’s weight over four seconds. When the averaged weight is
computed, the LOCKED light illuminates and the weight locks on the display.
Weight Lock/Unlock (AVERAGE/UNLOCK)
When the LOCKED light illuminates, the weight remains locked on the display.
Press
AVERAGE/UNLOCK
to unlock the display, or turn off the scale if weighing is
complete.
If the scale is touched during averaging:
1
Wait for the LOCKED light to illuminate.
CAUTION
Always clean/disinfect the scale between patients.
NOTE
#
This scale has an option to permanently lock the measurement units to kilograms (see
Locking Units to Kilograms (optional) on page 2-1).
NOTE
#
„
When the weight of the object is zeroed, the display shows 0 .
„
If the object is removed from the platform after its weight has been zeroed, the scale
shows a negative weight. Press
ZERO
to re-zero the scale.
„
When an object is on the platform and the display shows 0 , its weight has been zeroed.
If a patient is then placed on the platform, only the patient's weight will display.
CAUTION
Touching the platform or patient while the AVERAGING light is blinking can result in an
incorrect weight; see Weight Lock/Unlock (AVERAGE/UNLOCK) .