natus OLYMPIC SMART SCALE 50, Инструкция по эксплуатации

Страница: 13 / 64

OLYMPIC SMART SCALE Model 50/51 Instruction Manual 2-1
S e c t i o n
2
Installation
Installing the Smart Scale
The Smart Scale requires minimal handling during unpacking and installation.
To install the Smart Scale Model 50:
„
Before using the scale, remove and discard the green protective display cover.
„
Place the scale on a sturdy, flat, level table or countertop.
„
Attach the scale to a mobile cart or table: Four threaded (10-32 UNF) holes
are provided in the base plate of the scale for bolting it to a cart or table (see
Figure 2.2). The scale’s rubber feet may remain attached.
Locking Units to Kilograms (optional)
The standard configuration of the scale allows you to toggle the units of
measurement between metric and English (kilograms and pounds). You can
permanently lock the units to measure kilograms only.
WARNING
Electrical shock hazard when the enclosure is open. Unplug the power cord from the
electrical outlet when installing this device.
CAUTION
„
Only qualified technicians should assemble this device.
„
Read and be familiar with this instruction manual before assembling this device.
NOTE
#
The scale is heavy and awkward; two people should lift the scale. To pick it up, firmly grasp
the bottom of the scale; never attempt to lift the scale by its sides.
CAUTION
Ensure that the scale is away from the edge so that it cannot slide or “walk” off the table
or countertop.
CAUTION
If using the scale on a cart, securely anchor the scale to the cart. Confirm that the cart/scale
combination is stable at 10° of tilt with 25 kg weight on a platform end in its down position.