NARGESA MP3003 CNC, Инструкция, Страница: 9 / 112

INSTRUCTIONS BOOK PRESS BRAKE MP3003 CNC 9
2. TRANSPORTATION AND STORAGE
2.1. Transportation
Lifting should be performed by a crane, on the marking point to that end anchorage. The machine will never
rise by anywhere else other than the specified and provided the two points of the front of the machine will
be used because the weight is found mostly in the front so we will make the machine remain in a horizontal
line when raised.
2.2. Storage conditions
Press brake will not be never stored in a place where the following conditions are not settled:
* Humidity between 30% and 95% non-condensing.
* Temperature -25 to 55 ° C or 75 ° C for periods not exceeding 24 hours (remember that these
temperatures are in storage)
* It is advisable not to stack heavy objects on the machines.
* Do not disassemble for storage.
Lifting points to be
raised by a crane
Lifting points to be
raised by a crane