NARGESA MP3003 CNC, Инструкция, Страница: 42 / 112

ANEXO 1. SOFTWARE ESA S630 A24
Entry of the pneumatic flattening die support
If the press has a pneumatic flattening die support, the relative data can be entered in the General
Parameters Configuration page (refer to the machine parameters manual). Once the data have been
entered, flattened bends can also be obtained in the graphic mode using standard dies without having to
draw particular dies with bending-flattening functions.
Saving the drawing
At the end of the drawing, press the button to save it in the internal memory.
Enter the name of the die in the window that appears.
After the name has been entered, select the
[Ok] button.
Tolerated name characters
The entered name can be formed by a combination of numbers and letters (e.g. can be used the code of
the die of the catalogue).
2.2.2. Pre-set dies
The pre-set die page is presented in the form of a pre-drawn die along with a series of data that
characterize the shape of that die.
Figure 15 Pre-set die
By modifying any one of the values and pressing
[Ok], the drawing will be re-plotted by taking the modified
value into account.
Saving the drawing
At the end of the drawing, press the button to save it in the internal memory.
Enter the name of the die in the window that appears, touching with a finger on the field.
After the name has been entered, select the
[Ok] button.