NARGESA MP3003 CNC, Инструкция, Страница: 28 / 112

ANEXO 1. SOFTWARE ESA S630 A10
When the available tools are many for a fast choice can be used the scroll bar .
The function buttons have the following meanings:
-
[New Folder] to create a new folder where save the tools
- [Find] to find a tool from the punch or from the die list
- [New Drawing] to completely draw the punch or the die
- [New Type 1] to use a type 1 pre-set punch or [New default] to draw a pre-set die
- [New Type 2] to use a type 2 pre-set punch
- [New Type 3] to use a type 3 pre-set punch
- [New Type 4] to use a type 4 pre-set punch (round punch)
- [Insert] to insert the punch or the die selected in the work program or in the selected bend
How to display the preview
Allows you to display the tool preview (to make it easier to identify). The preview function is normally
enabled, but can be
disabled if not required. Comply with the procedure below:
- Press the button to access the menu
- Select the
4>> Preview item
- The preview item is disabled.
Repeat the operation to re-enable the item again.
How to copy a punch or die
This allows you to create a copy of a tool with another name so that it can then be modified. Select the tool
you wish to copy with a finger and then comply with the procedure below:
- Press the button to access the menu
- Select the
[Copy] item
- This accesses a window where the tool name must be entered.
After the name has been entered, select the
[Ok] button.
How to rename a punch or die
Allows you to change the name of a tool. Select the tool you wish to rename with a finger and comply with
the procedure below:
- press the button to access the menu
- select the
1>> Rename item
- this accesses a window where the new tool name must be entered
After the name has been entered, select the
[Ok] button.