NARGESA MP3003 CNC, Инструкция, Страница: 43 / 112

ANEXO 1. SOFTWARE ESA S630 A25
3. PROGRAMMING
3.1. List of programs
To enter the list of programs it is necessary to follow the steps below:
- Press
- The following window will appear:
Figure 16 List of programs
The window on the left is the program list.
The central boxes contain the program data on which the cursor is positioned (on the list).
The window on the right shows a preview of the program on which the cursor is found.
To scroll down the programs available on the list just use the scroll bar.
The function keys displayed have the following meanings:
-
[New Folder] to create a new folder where save the programs.
- [Find] to find a program in the list window.
- [New Numerical] to set a new numeric program.
- [New Graphic] to set a new graphic program.
- [Save Version] to save the programs in a previous version.
How to view the Preview
This allows you to see the preview of the program (if the program is graphic). The preview is normally
enabled but if desired you can also disable it by following the steps below:
- Press the button to open the menu.
- Select the item
4>> Preview.
- The preview window will be disabled.
- To re-enable it just repeat the steps above.