NARGESA MP3003 CNC, Инструкция, Страница: 103 / 112

ANNEX 3. LASER DEVICE C5
8. Performance
The laser device has got 2 units, one acting like a master and the other one acting like a slave.
Each unit has an Emitter laser and a Receptor laser. These units are sinchronized between them when
each unit detects the correct frame the other units is sending.
If an object interferes on the laser trajectory, it will block the punch descent, but not its going up. On the
same way if a too powerful light reaches any of the laser sensors, it will also act like safety by blocking the
descent.
There is a final line called “Muting Zone” where the laser does not interfere, like this, the metal sheet to be
folded will not cause a safety stop.
Protection area