NARGESA MP3003 CNC, Инструкция, Страница: 52 / 112

ANEXO 1. SOFTWARE ESA S630 A34
Drawing window
The drawing window page will be opened.
Figure 25 Drawing page of the piece.
The window on the left is the drawing window. The four windows on the right are for entering the drawing
data and they respectively represent:
1) The polar drawing data.
2) The Cartesian drawing data (normally not used).
3) The drawing data of a Radius bends.
4) The drawing data of a Dutch folding bends (hemming).
After having entered the general data and accessed
the Piece Set page, the first segment will appear in red
with a length of 20.0 mm. Touching with a finger the field “l” a “Soft Keyboard” will open, as in Figure 26
Figure 26 Soft Keyboard for setting the length of the piece
- With which you can change the length of the first segment by entering a value different from 20.
- After having pressed “OK” automatically you move to the next field, the “alfa” polar drawing data. Pressing
with a finger on this field the angles “Soft Keyboard” appears, like showed in figure 27