NARGESA MP3003 CNC, Инструкция, Страница: 11 / 112

INSTRUCTIONS BOOK PRESS BRAKE MP3003 CNC 11
4. INSTALLMENT AND START UP
4.1 Location of the machine
It is advisable to locate the machine properly to avoid having to move it; otherwise it would be required to
follow the guidelines outlined in the transport section (# 2). It should be placed on a flat, level surface to
prevent vibration and movement during folding operations. It is possible to level the machine by screws at
the base of the machine one at each corner.
4.2 Dimensions and working site
When the machine is placed it must be taken into account its size, the workspace of the operator and the
possible lengths of the workpiece.
The machine can be used by a single operator, which must be placed frontally to the machine, never in a
side area since he should control the whole machine and also the main protections are designed for the front
use of it.
4.3 Admissible outer conditions
Ambient temperature b5 º C and +50 º C without exceeding an average temperature of +45 º C 24h
Humidity between 30% and 90% non-condensing.