NARDA IDA, Руководство по эксплуатации, Страница: 115 / 292

6.10 The Marker function
Narda IDA - 3106
107
6.10.1 The Marker menu

Press the
Marker
softkey.
Figure 19: Marker menu (display with one marker)
6 9
1
2
3
7
4
8 10
5
No. Function / Explanation
1
Graphical display of the measurement value at the marker position.
2
Marker bar with marker information:
• Marker A : Marker A is active
• Channel: Selected channel.
(If a transmitter table is selected, the transmitter names will be shown here.)
• Freq: Frequency at the marker position
• Max. Pk: Selected trace type/detector and measured value
3
Graphical display of the marker position (for trace type
Max
in the example).
4
Marker functions for peak value selection (see Table 28 on page 109).
5
Specifies on which trace the marker is to be used
6
Sets Fcent to the position of the active marker. Parameter that depend on Fcent like Fspan
and RBW are automatically adapted.
7
Active marker (Marker
A
is active in the example).
8
Selects whether the marker is shown even after you exit the Marker menu.
9
Display type: Single marker or difference marker
10
You can set the marker evaluation properties under Marker Settings.