NARDA IDA, Руководство по эксплуатации, Страница: 201 / 292

10.5 Using the trigger function
Narda IDA - 3106
193
To use the Single or Multiple trigger types:
1.
Press the
Trigger Mode
softkey and select the appropriate function.
2.
Press the
Trigger Level
softkey and use the rotary control knob to set a
threshold value.

The threshold is indicated by a horizontal blue line on the screen.
3.
Press the
Trigger Slope
softkey to select the edge:
– Softkey
Trigger Slope: Rising
: Rising edge is selected.
– Softkey
Trigger Slope: Falling
: Falling edge is selected.
4.
Press the
Trigger Delay
softkey and select a value:
– Negative value: earlier time
– Positive value: later time

When you select a negative value, the trigger delay will be shown as
a vertical blue line on the screen.
When you have selected Single or Multiple, the readiness of the trigger
function is indicated at the lower right of the measurement screen:
Figure 44:
Time Domain (Scope)
operating mode, trigger function
Single
selected
but not yet started