NARDA IDA, Руководство по эксплуатации, Страница: 202 / 292

10 Time Domain (Scope) Mode
194
IDA - 3106 Narda
The following status messages are possible:
To start the recording:

Press the
Arm
softkey.

The message
Armed
appears on the screen and the
Arm
softkey is
now labeled
Break
.
To break off recording:
 Press the
Break
softkey.
10.5.3 Time Controlled
Time Domain (Scope) • Trigger Menu
I⁄Q Analyzer • Trigger Menu
This trigger type allows you to start the recording at a specified time.
Recording stops as soon as the Time Span has elapsed.
To start the recording immediately:
1.
Press the
Trigger Mode
softkey and select
Time Controlled
.

The message
Waiting for Arm
appears on the screen.
2.
Press the
Start Now
softkey.
To start the recording at a specified time:
1.
Press the
Trigger Mode
softkey and select
Time Controlled
.

The message
Waiting for Arm
appears on the screen.
2.
Press the
Start Date
softkey and enter the desired date. You can enter
the current date automatically by pressing the
Current Date
softkey.
Table 36: Trigger messages
Message Function / Explanation
Waiting for Arm Trigger mode has been activated (Single or Multiple) but the
trigger function has not yet been started (
Arm
softkey)
Waiting This message appears in Multiple trigger mode when the
trigger condition has already been met once and the trigger is
waiting for the next event.
Armed The trigger function has been activated (
Arm
softkey has
been pressed) but no valid event has occurred yet
Triggered This message appears only briefly when the trigger condition
is met.
Stopped An event has met the trigger condition. The display stops and
the signal trace is "frozen".