NARDA IDA, Руководство по эксплуатации, Страница: 250 / 292

16 Remote Control
242
IDA - 3106 Narda
3.
Start the application for controlling and managing the PC interface and
set the following interface parameters:
16.3 Connecting to the network
There is an Ethernet connector (100BaseT) located on the right hand side
panel of the device for connecting it to a network.
To make the connection to the network:
1.
Connect the IDA to the network using a commercially available network
cable.
2.
Adjust the network settings to match the network properties (see
Changing network settings
on page 73).

The device can be remotely controlled via the network.
16.4 Activating / deactivating remote control
To activate remote control:
 Transmit the command
REMOTE ON;

The IDA - 3106 switches to remote controlled operation.

The screen display switches off.

The keypad is disbled.
To deactivate remote control:
 Transmit the command
REMOTE OFF;

Remote control is deactivated.

The screen display switches on.

The keypad is enabled once more.
Parameter Setting
COM Port Optical or USB, as selected by connection made (item 1 above)
Baud rate 115200 Baud
Start bits 1
Data bits 8
Stop bits 1
Parity None
Handshake None (the IDA - 3106 does not support any software handshake)