NARDA IDA, Руководство по эксплуатации, Страница: 230 / 292

13 Measurement Data Memory
222
IDA - 3106 Narda
To display and recall data subsets:
1.
Select a data set with data subsets (column number > 1) using the rotary
control knob and then press the
View Sub-Data Sets
softkey.

The data subsets are displayed.
2.
Select a data subset using the rotary control knob and press the
Recall Data Set
softkey or the
OK
key.

The data subset is displayed in the form that it was saved.
RECALL
on the screen indicates that the data set is a saved data set.

The complete localization is displayed when you switch to the Map
menu.
To delete a data set:

Use the rotary control knob to select a data set to be deleted and press
the
Delete Data Set
softkey. You cannot delete individual data subsets.
To delete all data sets:
1.
Press the
Delete Menu
softkey.
2.
Press the
Select All
softkey.
3.
Press the
Delete Selection
softkey.
To delete a range of data sets:
1.
Press the
Delete Menu
softkey.
2.
Select the range you want to delete using the appropriate softkey
(there are several ways to select a range using the
Invert Selection
,
Select
,
Select First
and
Select Last
softkeys.
3.
Press the
Delete Selection
softkey.
Tip:
• You can use the softkeys to jump to the previous or next data
subset without having to go back to the Memory menu.
• You can use the softkeys to jump to the previous or next data
subset if several results are saved in one data set.