manualshive.com logo in svg

NanoString Technologies nCounter, Руководство пользователя

Поделиться
Скачать
NanoString Technologies nCounter Скачать руководство пользователя страница 7

 

 017-07  MAN-C0034-06

   

|

   

7

NanoString Technologies

®

 

USER MANUAL

1

  

Introduction

A.  Product Use Limitations

The nCounter Dx Analysis System and the nCounter Dx Analysis System with the FLEX configuration (when run in IVD mode) is intended for 

in vitro 

diagnostic use when used in conjunction with specific IVD cleared or approved assays citing its use. The nCounter Dx Analysis System 

may only be used with NanoString’s nCounter test kits.

The nCounter Dx Analysis System may only be operated by appropriately trained, professional users. NanoString recommends that all users 
read and understand this manual prior to attempting to operate the system. Keep this manual in close proximity to the instruments for 
easy access to instructions and safety information. Failure to comply with the instructions in this manual may pose a dangerous risk to the 
operator and void the manufacturer’s warranty.

B.  Product Components

The nCounter Dx Analysis System consists of two instruments: the Prep Station and the Digital Analyzer. A power cable is included with each 
instrument. The Prep Station also includes a pipette tip rack, a liquid waste container, a solid waste container, and silicone grease.

In addition to instrument software, a web-based software application (web application) is provided to configure runs, to observe sample 
statuses, and to download sample reports.

C.  Overview of the Procedure

1. 

  The web application is used to identify and annotate samples and define the test to be performed.

2. 

  After sample processing and hybridization has been completed according to the test kit instructions, samples are inserted into the 

Prep Station for purification and immobilization onto the internal surface of a Sample Cartridge (2–3 hours, depending on the number 
of samples).

3. 

  The Sample Cartridge is then transferred to the Digital Analyzer for imaging and analysis (about 4.5 hours, or 20–25 minutes per 

sample).

4. 

  During processing with the nCounter Dx Analysis System, the web application may be used to track sample statuses.

5. 

  Finally, test reports are available for download using the web application.

Содержание nCounter








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды