MUTOH Osprey 102, Руководство пользователя

Страница: 46 / 176

User’s Guide – Osprey 75/102/130
Chapter 3: Basics
46 AP-75102, Rev. 2.0, 28/11/2007
Step 5 :
Install a media core brace in case you use media is wider than 2 meter. This to prevent the media
to bend.
Step 6 :
Lift up the tension roller at the backside of the product with your hand so the roll media is unwinded
automatically by the roll unit.
No. Name
1 Roll media
2 Tension roller
Step 7 :
Insert the top of the media in the media feed slot after passing the roll media through the tension
roller system. See images below to see the path.
Notes
•
If there is a part not tightly wounded at the end of the roll media, wind it tightly again, then load it.
a. When using a roll media with the printable side on the outside of the roll.
No. Name
1 Roll media
2 Tension roller system
3 Media feed slot