MUTOH Osprey 102, Руководство пользователя

Страница: 173 / 176

User’s Guide – Osprey 75/102/130
Chapter 7: Troubleshooting
173 AP-75102, Rev. 2.0, 28/11/2007
7.3.5 Error requiring a restart
Error requiring a restart is displayed when the following fatal error has occurred during printer operation.
•
Foreign material disturbing the printer operation is involved in the printer.
•
An electrical circuit (such as board, motor, or sensor) failure has occurred.
•
An error on control program of the printer has occurred.
If an error requiring a restart has occurred, the printer works as shown below then stops.
Step 1 :
Power relating to the driving system is shut down automatically.
Step 2 :
All indicator lights on the operation panel are switched ON and beeps sound continuously.
Step 3 :
An error message is displayed on the operation panel.
Press any key on the operation panel to stop the beep sounds.
If error requiring a restart has occurred, solve the problems to restart the printer and delete the error.
If the same error message is displayed again, contact your local MUTOH dealer. Be sure to inquire by the code
numbers of the error messages.
No. Message Descriptions Solutions References
1. If foreign materials
such as a piece of
media or media dust
are involved in the
driving system,
remove them.
“When media jams
occur”
2. Make sure that the
replaced parts are
installed correctly.
“Replacing
consumables”
1 System Err I****Err [ ]
An error which
cannot be solved
promptly has
occurred.
3. Switch OFF the
printer. After 10
seconds or more
have passed, switch
the printer back ON.
Notes
•
*** In error messages are code numbers indicating what kind of error occurred.
•
[ ] may indicate the command code of the error.
•
For the settings on a computer, refer to the computer’s operation manual.