MUTOH Osprey 102, Руководство пользователя

Страница: 117 / 176

User’s Guide – Osprey 75/102/130
Chapter 6: Printer menu
117 AP-75102, Rev. 2.0, 28/11/2007
6.5.1.5 User media menu
Makes various settings on user defined media. In the User media menu, sixteen settings of "User 1" to "User
16" can be set.
Notes
•
If non-recommended media is used (user media), the following problems may occur.
o
Media detection error
o
Oblique, torn, and creased media
o
Media jams
o
Decrease in print quality due to blurring, missing, or smudging of ink
o
End detection error of roll media, etc.
•
Problems caused by using non-recommended media will void the warranty. For more information,
contact your local MUTOH dealer.
Setup items Parameters Descriptions
Ink Dry Timer
To set waiting period from the end of operation to the start of
next printing to dry ink on the printed media.
Refer to: “Ink Dry menu”
Height
To set the distance (head height) from print head face to
media.
Refer to: “Head Height menu”
Stiffness
Makes the setting for the absorbing power of the media to the
printing board depending on the hardness of the media.
Refer to: “Stiff menu”
User 1 to 16 (1/3)
Lever Pressure
To set the pressure of the pressure lever.
See “Lever pressure menu”
Heater
To set the platen heater temperature during printing is set.
Refer to: “Platen heater menu”
Drier
To set the ink drier temperature during printing is set.
Refer to: “Drier menu”
Prev. Stick
To set the Stick prevention operation when start printing.
Refer to: “Prev. Stick menu”
User 1 to 16 (2/3)
Media feed
compensation
To perform various settings for media feed compensation
Refer to: “Media feed compensation menu”
Idle heat
To set the idle heat temperature of the platen heater when
the product is on standby.
Refer to: “Idle heat menu”
User 1 to 16 (3/3)
Idle timeout
To set the idle heat time of the platen heater when the
product is on standby
Refer to: “Idle timeout menu”
1 to 16 (1/3 to 3/3) –
[CANCEL] key: To shift to the previous hierarchy menu. See
“Media type menu”