MUTOH Osprey 102, Руководство пользователя

Страница: 131 / 176

User’s Guide – Osprey 75/102/130
Chapter 6: Printer menu
131 AP-75102, Rev. 2.0, 28/11/2007
6.5.2.9 Interval time menu
Sets interval time for repeat printing.
Setup items Parameters Descriptions
Interval Time
<0.0 sec.> to 0.1 to
5.0 sec.
Change interval time by operating the following keys.
•
[F2] key: Increases setup value.
•
[F4] key: Decreases setup value.
•
[ENTER] key: To confirm setup value, shifts to the
previous hierarchy menu.
•
[CANCEL] key: To cancel setup value, shifts to the
previous hierarchy menu.
Refer to: “Repeat printing menu”
6.5.2.10 Effect setup menu
Setup items Parameters Descriptions
None 1
None 2
•
The wave mode is not used.
•
If white lines or uneven print density appear in printed media in
“None1” set to “None2”
Wave 1 1/2
Wave 2
•
The machine will print while using the wave.
•
It will improve the printing quality.
•
If white lines or uneven print density appear in printed media in
“Wave1” set to “Wave2”
Fine&W1
Fine&W2
•
The machine will print at a slower speed while using wave.
•
Set up this menu when improving the printing quality compared with
“Wave”
•
If white lines or uneven print density appear in printed media in
“Fine&W1” set to “Fine&W2”
Effect
2/2
NozzleODD
•
Performs “None1” printing using one side of the nozzles of the print
head.
•
Since only one side of the nozzles are used, printing speed becomes
half of “None1"
This mode is for engineering purposes only!
NozzleEVN
•
Performs “None1” printing using the other side of the nozzles of the
print head that is used for “NozzleODD”.
•
Since only one side of the nozzles are used, printing speed becomes
half of “None1”
This mode is for engineering purposes only!