MUTOH Osprey 102, Руководство пользователя

Страница: 45 / 176

User’s Guide – Osprey 75/102/130
Chapter 3: Basics
45 AP-75102, Rev. 2.0, 28/11/2007
3.2.3 Loading roll media
Be sure to read and understand the safety warnings before handling the printer.
Step 1 :
Switch ON the printer.
•
Refer to “Switch ON/OFF the printer”
•
The following message is displayed on the operation panel:
Notes
•
In the following conditions, follow "Menu setup on the operation panel" and set individual settings.
o
When using the winding unit: Set the winding unit setting to "ON" Refer to: “Winding unit menu”.
o
When not performing media detection during media initialization: Set media detection to "No".
o
Refer to: “Media detection menu”.
o
When using roll media such as the printable side is outside: Set the feed unit item to "Outside".
o
Refer to: “Feed unit menu”.
o
When using the roll media such as the printable side is inside: Set the feed unit item to "Inside".
o
Refer to: “Feed unit menu”.
Step 2 :
Verify the MEDIA SET lamp of the control panel is OFF.
Step 3 :
Press the [F2] key to raise the pressure roller.
•
The MEDIA SET lamp will light orange.
•
The following message is displayed on the operation panel:
Step 4 :
Open the front cover.
No. Name
1 Front cover