MUTOH Osprey 102, Руководство пользователя

Страница: 81 / 176

User’s Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
81 AP-75102, Rev. 2.0, 28/11/2007
No. Evaluation Item Evaluation Method Criteria
11
Damage, wrinkle, stain,
foreign materials on
media
Confirm media visually.
No damage, wrinkle, stain, and foreign
materials on media.
12 Cardboard core I.D. Confirm card board core visually.
•
Diameter: 3". (tolerance:±3mm) •
•
Length: Max. 2640mm
•
Projection from the edge of roll
•
media:
o
Right: Max. 25 mm
o
Left: Max. 25 mm
•
Full insertion of scroller to media
flange.
•
No slipping
13 Curl Confirm media visually.
•
No float by the curl when sticking
media to the media guide.
•
No friction with the print head
nozzle during printing.
14 Scuffing Confirm media visually.
No scuffing on media surface and edge
face.
5.1.6 Media Feed Compensation (Distance Adjust)
Be sure to read and understand the safety warnings before handling the printer.
When used?
Depending on the thickness of the media, the media feed amount will have to change. If printing results show
following symptoms:
•
Overlapped printing images
•
White lines on printing image
Then, adjust the media feed compensation value with the following procedure.
Procedure:
Step 1:
Go to the ‘Media feed compensation’ menu on the operation panel by following "Menu setup on the
operation panel". See image below.
•
The ‘Media feed compensation’ menu is named ‘DistAdj.’ menu on the operation panel.
•
Refer to: “Printing by Media feed compensation menu” for more details about all the functions in the ‘Media
feed compensation’ menu.