MUTOH Osprey 102, Руководство пользователя

Страница: 168 / 176

User’s Guide – Osprey 75/102/130
Chapter 7: Troubleshooting
168 AP-75102, Rev. 2.0, 28/11/2007
7.3 ERROR MESSAGES
Be sure to read and understand the safety warnings before handling the printer.
This chapter explains the messages displayed on the operation panel both when the printer works normally and
when an error occurs, and the solutions for the errors.
7.3.1 Status messages
The following are the status messages while the printer works normally.
(1) Displays of the operational status
The following operational status is displayed on the first line on the operation panel.
No. Message Solutions References
1 Ready to print
Waiting for the next operation.
(The media is loaded.)
–
2 Paper End
The printer is waiting for the next operation.
(No media is loaded into the printer.)
“Media handling”
3 Receiving The printer is receiving data. –
4 Converting The printer is converting data. –
5 Printing The printer is printing. –
6 Data Writing The printer is writing data to the hard disk. –
7 Waste Ink Tank Full
Replace the waste liquid absorption material
in the tank.
“Disposal of waste fluids”
8 No Jetwash
Refill the jet wash fluid. “Refilling the ink and jet
wash fluid”
9 Moving Origin Pos
The Print head is returning to the origin
position of the origin setting process.
See “Origin setup menu”
10
WarmingUp P:
**%D:**%
The platen heater / ink drier is warming up.
The thermal state of P (platen heater) and D
(ink drier) is displayed. (** displays a thermal
state by 00-99. When it reaches 100%, it is
displayed as “OK”.)
-
(2) Displays of the operational status
The following operational status is displayed between the first and the third line on the operation panel.