User’s Guide DrafStation and Drafstation Pro
Chapter 3: Basics
52
AP-75730, Rev. 2.1, 19/01/2009
Notes
•
When replacing ink cassettes on the Drafstation Pro, be aware to insert the same ink cassettes as
those who were in previous.
•
If you insert the second configuration without performing a cleaning, the printer will be defected.
•
When you want to switch from 1 configuration to another, you need 4 cleaning cassettes RJ9-22-CLN.
And you need to contact your local Mutoh dealer to perform the necessary cleaning.
Notes
•
Only use Mutoh original ink.
This plotter has been developed for use of genuine ink cartridges. In case of using non genuine ink
cartridges, notice the following :
o
Printing might become blurred and the end of ink in the cartridge might no longer be correctly
detected.
o
The problems caused by doing so will not be covered by the warranty and repair expenses will
have to be paid by the customer.
•
For types and details of ink cartridges refer to
“
Options/Supplies.
“
•
When moving an ink cartridge from a cold place to a warm place, keep the ink cartridge unused for
three hours or more in the printing environment.
(3) Replacement steps
Notes
•
Do not shake ink cartridges. This could cause ink leakage.
•
When moving an ink cartridge from a cold place to a warm place, keep the ink cartridge unused for
three hours or more in the printing environment.
•
Do not refill the ink cartridges.
Doing so may result in incorrect printing.
•
Insert or remove the ink cartridge at the time of replacement only.
Inserting or removing ink cartridges except at the time of replacement may result in incorrect printing.
