User’s Guide DrafStation and Drafstation Pro
Chapter 3: Basics
41
AP-75730, Rev. 2.1, 19/01/2009
3.2.3 Loading sheet media
Be sure to read and understand the safety warnings before handling the printer.
The following sizes of sheet media can be used with the plotter:
RJ-901C
•
Media width: A4 size to A1 plus size (210 mm to 610 mm)
•
Media length: Maximum 1200 mm
RJ-900C and Drafstation Pro
•
Media width: A4 size to A0 plus size (210 mm to 1080 mm)
•
Media length: Maximum 1600 mm
Notes
•
When roll media is loaded, wind back the roll media before loading sheet media.
•
When using the paper basket, refer to: “Paper basket setting” the paper basket cannot be used if the
Take-up system is mounted
To load sheet media, follow the steps below.
Step 1 :
Switch ON the plotter.
Result:
·
The plotter initialises.
·
The operation panel displays "Paper End".
Step 2 :
Press the [Back] key of operation panel, and select "Sheet".
Result: The sheet media light lights up.
Notes
•
If selecting "Roll" when loading sheet media, the media may not be correctly loaded.
Step 3 :
Push the media hold lever (1) backward. See image below.
N° Name
1
Media hold lever
Result: The operation panel displays “Lever Up”.
