Multitech CommPlete CC2400, Руководство по установке системы и быстрому запуску

Страница: 84 / 113

System Installation and Quick Start Guide
84
90. Press E
NTER
to accept the current setting, or type the number of the new
option and press E
NTER
. The Getting PRI info …menu appears.
91. To change the Active Channels option, type 7 and press E
NTER
. The
Active Channels menu appears:
Active Channels (-(previous), <23>):
Enter Selection (-(previous), q (uit), d(one), <1>): d
92. Type d and press E
NTER
to display a summary of settings:
Switch Type:AT&T 5ESS
Line Coding:Binary 8 Zero Substitution (B8Zs)
Framing Format:Extended Super Frame
Error Correction (CRC4/6):Enabled
Call Distribution:One to One
Set Carrier:PCM24/T1
Active Channels:23
Save changes and config the device? (<y>, n): y
93. Type y and press E
NTER
to save the changes and configure the PRI card.
The following messages appear:
Configuring . . . .
Config Completed
The RAS must be reset to finish the PRI config. Reset the
RAS? (< y>, n): y
Select a PRI card (10A, -(previous), <d>(one)): d
94. Type y to reset the RAS. The Select a PRI card prompt appears. To
configure another PRI card, type the device number of the PRI you want
to set up, and repeat steps45-73. Otherwise, type d and press E
NTER
to
finish.
95. The Device Specific Setup screen appears:
Device Specific Setup
1. Controller Setup
2. Ras Setup
3. T1 Setup (Required)
4. E1 Setup
5. PRI Setup
Enter Selection (-(previous), q (uit), <3>): q
96. Type q to complete the configuration. The A:\# appears.
[1] A:\ #
Return to the MultiComm Manager Environment Setup options by
typing se.
MultiCommManager Installation
97. Install the MultiCommManager software on your supervisor PC. Open
the MultiCommManager Explorer window and select Physical View.
98. Open the MultiCommManager Explorer window and select Physical
View
.