Multitech CommPlete CC2400, Руководство по установке системы и быстрому запуску

Страница: 20 / 113

System Installation and Quick Start Guide
20
Safety Warnings
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jacks are
specifically designed for wet locations.
•
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.
•
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electrical shock from lightning.
•
Do not use the telephone to report a gas leak in the vicinity of the leak.
•
Ports that are connected to other apparatus are defined as SELV. To
ensure conformity to EN 41003, ensure that these ports are only
connected to the same type on the other apparatus.
CC2400 Installation Procedure
The components of the CommPlete Communication Server are packed in
several cartons. Unpack and assemble them in the order provided, checking
for shipping damage as you do so. The following instructions are for the
CC2400 CommPlete. Instructions for the CC9600 CommPlete precede these
instructions. The procedures are divided into segment types; therefore, you
should refer to the installation procedure appropriate to your setup.
•
To install a T1 configuration, refer to page 21.
•
To install an E1 configuration, refer to page 23.
•
To install a PRI (23B+D) configuration, refer to page 25.
•
To install an EPRI (30B+D) configuration, refer to page 27.
Note: If this is a first-time installation or you need more detailed instructions,
refer to the user guides for the individual components.