MULTILIFT XR S Скачать руководство пользователя страница 165

Страница: 165 / 210

XR21S59 CHU

165

1/2018

113813003

Hooklift Multilift XR21S59 CHU

Service Manual

Safety instructions

Loose, long hair, loose clothing, jewellery etc. are an accident risk.

Use always personal protections and other protective means in service work.

All modifications and additions made to the equipment construction, which might have an

effect to the operational safety of the hooklift, are prohibited. In general, all modification

and additional work on the equipment must be consulted with the dealer or manufacturer

of the equipment. Also a more extensive repair work or welding work to be done on frames

must be approved by an authorised service shop or the manufacturer of the equipment.

All the spare parts must conform with the technical requirements of Multilift. The best way

to ensure this is to use the original Multilift spare parts.

The safe and easy accomplishment is best achieved by using the correct and sound tools.

Note the service and inspection periods mentioned in this instruction and the replacement

needs of parts which have been noted in connection with the equipment inspection.

Wash and clean the equipment regularly before any service work.

Never service an equipment when the truck engine is running or the PTO is engaged.

Each service work must have a named responsible person who is responsible for the

vocational skills of the person carrying out the work.

Try always to separate the service area from persons not involved.

Before water wash, cover and protect all the electric components and connections. Do not

direct the washing agents to hot points.

Содержание XR S



















































































































































































































Результаты поиска

Содержание XR S

Отзывы:

Похожие инструкции для XR S

Бренды по названию

Популярные бренды

MULTILIFT XR S, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание XR S

Отзывы:

Похожие инструкции для XR S

Бренды по названию

Популярные бренды