MSI CellScale 3750CS Скачать руководство пользователя страница 40

Страница: 40 / 94

Page 40 MSI-3750CS RF Weighmeter • User Guide

3750CS

ELL

CALE RF DIGITAL WEIGHT INDICATOR

CONTRAST

Used to optimize the contrast of the LCD at various viewing angles. This is factory preset for optimal viewing.

By stepping through the 8 steps the contrast can be improved for off-angle or temperature extreme applications.

If the display is ghosting (off segments are visible), use a lower setting such as 1-4. If the display is too dim,

use a higher setting such as 5-8.
To Adjust the LCD Contrast

To Change the Filter Setting

KEYFCTN

FILTER

NONE

LOW

FILTER

1) Push SETUP twice. The message reads “KEY

FCTN”.

2) Push the DOWN scroll key to change the menu

selection to “FILTER”.

3) Push ENTER. The current setting for the filter is

shown.

4) Select the “NONE”, “LOW”, or “HIGH” filter

by using the UP/DOWN keys to scroll through

the choices. In this example, we’ll pick the LOW

filter which is suitable to low to medium vibration

situations.

5) Push ENTER.
6) You are back in the SETUP menu. Return to normal

scale operation (LOW Filter on) by pushing EXIT

(SETUP).

KEYFCTN

CONTRAST

(darkest) to

(lightest)

CONTRAST

1) Push SETUP twice. The message reads “KEY

FCTN”.

2) Push the UP scroll key until the menu selection is

“CONTRAST”.

3) Push ENTER. The current setting for the contrast

is shown.

4) Adjust the contrast by pushing the UP or DOWN

key. Observe the display from the angle it is normally

used. Adjust the contrast just to the point where there

is no ghosting of the unlit segments.

5) Push ENTER.

6) You are back in the SETUP menu. Return to normal

scale operation by pushing EXIT (SETUP).

Lower Display Mode

The 3750CS has an eight character lower display that is customized through the use of this setup menu. There

are eleven data types available for display:

1) LC NAME – This is a name assigned in the CellScale for the selected load cell channel.

2) ID CODE – Displays the current ID Code’s number (see “Setup ID Codes”).

3) ID NAME – Displays the current ID Code’s name.

4) ALL ID

∑

– Displays the grand total of all active ID Codes (see Statistics).

5) ONE ID

∑

– Displays the total of current ID Code.

6) n GRAND – Displays the number of totaled weighments of all ID Codes.

7) n SAMPLES – Displays the number of totaled weighments for the current ID Code.

8) DISABLED – The lower display is blank, except for transient messages.

9) WT TYPE – Displays “GROSS” or “NET” and other weigh mode types.

10)SC INDEX – Displays the Scale index, used in multichannel CellScale systems.

11)LC NUMBER - Displays the A/D channel and sub channel of the currently addressed CellScale.

Содержание CellScale 3750CS































































































Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды

MSI CellScale 3750CS, Руководство пользователя

Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды