MSI-9000 CellScale
®
System • 3750CS User Guide Page 29
MEASUREMENT SYSTEMS INTERNATIONAL
Software V1-15 to 1-20
9
TEST A
9
TEST B
9
TEST C
9
TEST 1
10
11
TEST 1a
12
TEST 1a_
12
13
9) Push the ABC1 key four times to get a “1” to
appear.
Alternately the Alpha key could be pressed to numeric mode “n” to
input a 1.
10) Push the Aa1 (ALPHA) key to change to lower case
letters. An “L” will indicate the change.
11) Push the ABC1 key for a lower case “a”.
12) Push the ENTER key twice to terminate the ID
Code entry. The 3750CS pauses while checking
its memory for a match. If no match is made the
display reads “ADD ID”.
13) The new ID Code appears briefly on the screen.
Next, the 3750CS returns to normal scale operation
with the new ID Code. Any Tare value and new
totals will be stored in the new ID Code.
To Access an Existing ID Code (Numeric only example)
The process of accessing an existing ID Code is identical to the process of creating a new ID Code. When the 3750CS detects an ID Code entry it always
checks to see if the Code already exists.
1
2
5_
3
56_
3
567_
4
4
5
1) Push ID#. The current ID is displayed.
(This example uses F1, can be changed with the Function Key setup
procedure).
2) Push the first digit of the new ID Code. In this
example, we are searching for the ID Code “567”
we used in the earlier example.
3) Push the second and third numbers.
So far, no Enter key has been necessary.
4) Push the ENTER key twice to terminate the ID
Code entry. The 3750CS checks its memory for a
match. When the match is made the message reads
“FOUND ID”.
If at this step, the message reads “ADD ID”, then the name was not entered
the same way it was created. See “Deleting an ID Code”.
5) The 3750CS briefly shows the ID number and then
returns to normal scale operation. Any Tare value
and new totals will be stored in the ID Code “567”.
Total readings will be added to any existing totals
previously stored on ID Code “567”.
