MSI CellScale 3750CS Скачать руководство пользователя страница 27

Страница: 27 / 94

MSI-9000 CellScale

System • 3750CS User Guide Page 27

MEASUREMENT SYSTEMS INTERNATIONAL

Software V1-15 to 1-20

Key Functions during ID Entry

...

Used to Initiate ID Code entry.

The location of ID# can be changed with the Function Key Setup procedure.

Used to enter characters. If pushed twice Enter also functions as “EXIT

and SAVE”.

Pushing the EXIT key will terminate the data entry and cause any changes

made to be canceled. “EXIT and don’t SAVE”.

The Alpha Key is used to change the data entry from Numeric to Alpha-

numeric. The LCD indicates “n” for numeric entry, “U” for upper case

Alpha-numeric, and “L” for lower case Alpha-numeric.

Alpha-numeric Keys. When the Alpha key is in the “n” condition, these

keys provide direct numeric digits. When the Alpha key is in the “U”

condition, the keys provide the letters and number. For example, the 2 key

provides “E”, “F”, and “2” in rotation. The 9 key provides quick access

to the “@” symbol

Clear. Will erase any character the cursor is positioned on and move the

remaining characters to the left.

Pushing CLEAR followed by the LEFT Cursor key will clear the entire data line.

Up and Down Scroll keys (numeric mode). Used to scroll through the

available character set. Using the Scroll keys can be an alternate to using

the Alpha-numeric keys. They provide a convenient way to change, for

example, a 1 to a 2.

Left and Right Cursor Keys. Use to position the cursor under characters

to be edited.

Used to insert characters within a string. Position the cursor over the

character you wish to insert in front of, then push the NET/GROSS key.

The “highlight” character will appear on the current position. Pressing the

DOWN Scroll key will delete the current character. Pressing the UP Scroll

key will insert a character.

In Alpha mode, the space key provides space and punctuation marks: ! “ # $

% & ‘ ( ) * +, – . / : ; < = > ? [ \ ] ^ _ `

Some of the punctuation marks are hard to recognize on the 16 segment display. Use the ASCII chart and the

numeric display to verify the identity of the mark.

General Alpha-numeric Entry Procedure

1) Use the

Aa1

(ALPHA) key to switch between numeric “n”, upper case “U”, or lower case “L”.

2) Press the desired character key. If a “B” is needed, push the

ABC0

key twice.

3) Enter the displayed character by either pushing a different key, or the

ENTER

key. If, for example, two

“B”s in a row are needed, use the

ENTER

key.

4) Terminate the character string by pushing

ENTER

twice.

Some lower case characters can not be properly represented on the 16 segment displays. Lower case letters with descenders may be represented with

the upper-case equivalent on the LCD. However, when the ID Code is printed or transmitted to a computer, the proper lower case character will be sent.

Font Substitutions: “F” for “f”, “P” for “p”, “X” for “x”,

Содержание CellScale 3750CS































































































Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды

MSI CellScale 3750CS, Руководство пользователя

Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды