MSI CellScale 3750CS Скачать руководство пользователя страница 19

Страница: 19 / 94

MSI-9000 CellScale

System • 3750CS User Guide Page 19

MEASUREMENT SYSTEMS INTERNATIONAL

Software V1-15 to 1-20

Tare - Rules for Use:

1) Only positive gross weight readings can be tared. Weight can be tared in both the NET and GROSS modes.

When in the NET mode, the TARE is not cumulative, all the weight is zeroed.

2) The motion annunciator must be off. The weight reading must be stable.

3) Setting or changing the tare has no effect on the Gross zero setting.

4) Taring will reduce the apparent over range of the scale. For example, taring a 10 lb. container on a 60

lb. scale, the scale will overload at a net weight of 50 lb. (60-10) plus any additional allowed overload

(usually ~4% or 9d).

5) The scale stores the Tare value in the current ID Code memory until cleared. Each available ID Code

can store independent Tare values.

Multiple Tare Memories

The 3750CS is capable of storing Tare values through the use of the ID Codes. Each ID code stores an

independent Tare. See Section 3 “ID Codes” for more information.

SETUP TARE

Programs the

TARE

key mode (TAREMODE), the automatic TARE Clear function (AUTO CLR), and

the TAREALL function.

UNIV TAR

TAREMODE

1) AUTO – Only Auto Tare is in operation. Every time the TARE key is pushed, the current weight on

the scale is tared.

2) KBD/UPDN – In this mode, pushing the TARE key will enable the numeric keypad for Keyboard Tare

and the

UP/DOWN

scroll keys for TARE

UP/DOWN

. Also in this mode, pushing the TARE button a

second time will enact AUTO Tare.

UNIV TAR

The Universal Tare feature allows a single Tare value to be shared by all ID Codes. With UNIV TAR enabled

the individual Tares stored with each ID Code are ignored (but not erased). Disabling UNIV TAR will restore

the original Tare values. UNIV TAR is intended for those applications where a common carrier or pallet is used,

but multiple ID Codes are necessary for data collection.

AUTO CLR

Enabling “AUTO CLR” causes the 3750CS to clear the Tare Value after each lift greater than 0 NET. The

Tare Value is cleared and the display mode reverts to Gross Weight once the load is removed (the weight goes

below 0 NET). The “ON TOTAL” setting clears the Tare Value after the load is totaled. The default for the

“AUTO CLR” function is “DISABLED” . When disabled, the Tare Value can only be cleared manually (see

“To Clear Tare and return to Gross Mode”.)

Содержание CellScale 3750CS































































































Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды

MSI CellScale 3750CS, Руководство пользователя

Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды