MSI CellScale 3750CS Скачать руководство пользователя страница 4

Страница: 4 / 94

Page 4 MSI-3750CS RF Weighmeter • User Guide

3750CS

ELL

CALE RF DIGITAL WEIGHT INDICATOR

FEATURES

• Designed to meet or exceed all US and international standards.

• 6 Large, (.9”) digits for clear weight readings from a distance.

• Reliable 2.4 GHz Frequency Hopping RF communications. Highly immune to interference and multi-path

problems. Range in excess of 600 feet indoors and up to 5 miles line of sight with proper antennas.

• Each 3750CS can act as a terminal for any CellScale. A 3750CS can monitor multiple scales on a single

CellScale, or multiple scales tied to multiple CellScales.

• Up to 32 per connected CellScale ID Codes with separate Alphanumeric Names, Tare, Mode, and Totals. ID

Codes are addressed by any customer given name or number.

• Easy to read annunciation of ID Names and Menu Prompts are provided on eight .5” alphanumeric

Characters.

• Full RS-232 output formatting offers exceptionally versatile data output. Weight data can be printed

in any desired way, the customer can add any alpha characters and/or printer formatting commands,

including formatting for Bar Code printers. The Comm Port is bidirectional allowing computer controlled

operation and data reception.

• Analog bar graph provided for relative to full-scale weight indication. Also used for RF level indication.

• Display illumination uses rugged, long life, LED backlighting coupled with a transflective LCD to provide

optimum display contrast under all ambient conditions from full sunlight to total darkness. Operation is

light-sensing automatic or manually set.

• Versatile power input options: AC Only (90-260 VAC 45-65 Hz), 9-36 VDC Input, and 18-60 VDC.

Accessory Power Supplies are available to allow 250 VDC operation as well. A UPS option is available

for the vehicle power supplies.

• Easy to maintain: Full digital calibration assures reliable, repeatable measurements.

• Selectable for lb., kg, g, tons, metric tons, ounces, and per cent (some units and /or units switching may

be prohibited in legal for trade units).

• Multi-mode automatic or manual weight totalizing with multiple ID registers.

• Complete Marine sealing ensures reliable operations under harsh conditions. Rugged cast aluminum package

is coated to resist corrosive atmospheres. Meets all requirements of NEMA 4 and IP66.

• 32 set points standard – programmable for any in-range weight for operator alerts or process control.

Optional Set Point Relay outputs are available for Set Points 1-8. Set point management is performed by the

CellScale, which has 32 programmable set points. The 3750CS has independent set point reaction (relays,

messages, display modes, comm port outputs, etc.).

Содержание CellScale 3750CS































































































Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды

MSI CellScale 3750CS, Руководство пользователя

Результаты поиска

Содержание CellScale 3750CS

Отзывы:

Похожие инструкции для CellScale 3750CS

Бренды по названию

Популярные бренды