MPC NetFRAME 1420 Скачать руководство пользователя | Manualshive

Страница: 64 / 120

background image

MPC Computers, LLC

NetFRAME 1420

64

Legacy Diskette A

This setting allows the user to set the type of floppy disk drive installed as diskette A. The options
are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5 in, 1.44/1.25MB, 3.5 in and 2.88MB 3.5 in.

Parallel ATA

This setting allows the user to enable or disable the function of Parallel ATA. The options are
Disabled and Enabled.

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The options are
Disabled and Enabled.

Native Mode Operation

Select the native mode for ATA. The options are: Serial ATA and Auto.

SATA Controller Mode

Select Compatible to allow the SATA and PATA drives to be auto-detected and placed in the
Legacy Mode. Select Enhanced to allow the SATA and PATA drives to be auto-detected and
placed in the Native IDE Mode.

Note: The Enhanced mode is supported by the Windows 2000

OS or a later version.

When the SATA Controller Mode is set to "Enhanced", the following items will display:

Serial ATA (SATA) RAID

Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS environment, use the
RAID driver if this feature is set to Enabled. If set to Disabled, use the Non-RAID driver. When
this feature--SATA RAID is set to Enabled, the next item-"SATA AHCI Enable" will not be
available.) The options are Enabled and Disabled (*Default). *If this feature is set to "Enhanced",
the following feature will be available:

SATA AHCI

Select Enable to enable the function of Serial ATA Advanced Host Interface. (*Take caution when
using this function. This feature is for advanced programmers only.) The options are Enabled and
Disabled.

ICH RAID CodeBase

Select Intel to enable Intel's ICH RAID Controller for the Windows OS. Select Adaptec to enable
Adaptec's RAID Controller for the Linux OS. The options are Intel and Adaptec.

Primary IDE Master/Slave, Secondary IDE Master/Slave, or Primary IDE
Master/Slave, SATA Port 1, SATA Port 2,SATA Port 3, SATA Port 4

These settings allow the user to set the parameters of Primary IDE Master/Slave and Secondary
IDE Master/Slave slots. Hit <Enter> to activate the following sub-menu screen for detailed options
of these items. Set the correct configurations accordingly.

«
...
62
63
64
65
66
...
»

Содержание NetFRAME 1420

























































































































Отзывы:

Нет отзывов

Похожие инструкции для NetFRAME 1420

Бренд: Premio Страницы: 3

Adaptive Server IQ 12.4.2

Бренд: Sybase Страницы: 536

Бренд: Watchguard Страницы: 32

Бренд: Sercomm Страницы: 75

Бренд: Patton electronics Страницы: 16

Бренд: Exsys Страницы: 24

AMX Vision2 V2-MASTER-1210

Бренд: Harman Страницы: 2

ANR-C62-N1 Series

Бренд: Acrosser Technology Страницы: 57

Бренд: Gigabyte Страницы: 2

Бренд: MSI Страницы: 106

Crestron 908012

Бренд: SIERRA VIDEO SYSTEMS Страницы: 32

PRICOM PRICOM C- 5100

Бренд: Silex technology Страницы: 7

TS-U100 - NAS Server - USB

Бренд: TRENDnet Страницы: 47

Бренд: MO-SYS Страницы: 26

DPR-1260 - RangeBooster G Multifunction Print Server

Бренд: D-Link Страницы: 55

Бренд: D-Link Страницы: 49

Compaq AlphaServer DS10

Бренд: HP Страницы: 43

Cluster Platform Hardware Kits v2010

Бренд: HP Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды