manualshive.com logo in svg

MPC NetFRAME 1420, Техническое справочное руководство, Страница: 72 / 120

Поделиться
Скачать
MPC NetFRAME 1420 Скачать руководство пользователя страница 72

MPC Computers, LLC 

 

NetFRAME 1420 

72 

DMA Channel 

This feature allows the user to select the DMA Channel for the Parallel Port. The options are 
DMA1 and DMA3. 

Floppy Disk Controller 

This setting allows you to assign control of the floppy disk controller. The options are Enabled 
(user defined), Disabled, and Auto (BIOS and OS controlled). 

Base I/O Address 

Select the base I/O address for the parallel port. The options are Primary and Secondary. 

DMI Event Logging 

Access the submenu to make changes to the following settings. 

Event Log Validity 

This is a display to inform you of the event log validity. It is not a setting. 

Event Log Capacity 

This is a display to inform you of the event log capacity. It is not a setting. 

View DMI Event Log 

Highlight this item and press [Enter] to view the contents of the event log. 

Event Logging 

This setting allows you to Enable or Disable event logging. 

ECC Event Logging 

This setting allows you to Enable or Disable ECC event logging. 

Mark DMI Events as Read 

Highlight this item and press [Enter] to mark the DMI events as read. 

Clear All DMI Event Logs 

Select Yes and press [Enter] to clear all DMI event logs. The options are Yes and No. 

Console Redirection 

Access the submenu to make changes to the following settings. 

COM Port Address 

This item allows you to specify to redirect the console to Onboard COM A or Onboard COM B. 
This setting can also be Disabled. 

BAUD Rate 

This item allows you to select the BAUD rate for console redirection. The options are 300, 1200, 
2400, 9600, 19.2K, 38.4K, 57.6K and 115.2K. 

Console Type 

This item allows you to choose from the available options to select the console type for console 
redirection. The options are VT100, VT100,8bit, PC-ANSI, 7bit, PC ANSI, VT100+, VT-UTF8. 

Flow Control 

Содержание NetFRAME 1420

























































































































Отзывы:

Нет отзывов