MPC NetFRAME 1420 Скачать руководство пользователя страница 86

Страница: 86 / 120

MPC Computers, LLC

NetFRAME 1420

cord.

FAQs

Question:

What type of memory does my system board support?

Answer:

This server supports up to 8 GB of unbuffered, ECC, DDR2-677/533/400, two-way

interleaved or non-interleaved SDRAM.

Question:

How do I update my BIOS?

Answer:

It is not recommended that you upgrade your BIOS if you are not experiencing problems

with your system.

Question:

What's on the CD that came with my system board?

Answer:

The supplied compact disc has quite a few drivers and programs that will greatly

enhance your system. We recommend that you review the CD and install the applications you
need.

Specific Problems

This section provides a more detailed approach to specific problems you may encounter. The
following information is covered in this section:

Power Light Problems

Overheat Problems

Screen Character Problems

Cooling Fan Rotation Problems

Server Connection Problems

Network Problems

Application Software Problems

Undetected Bootable CD-ROM

Power Light Problems

If the power light does not light, check the following:

Is the system operating normally? If so, the power LED may be defective or the cable

from the front panel to the server board is loose.

Are there other problems with the system? If so, check the items listed under Cooling Fan

Rotation Problems.

Overheat Problems

This light indicates an overheat condition in the chassis.

If the overheat light is lit, check the following:

1. Make sure that cables are not obstructing the airflow in the system.

Содержание NetFRAME 1420

























































































































Результаты поиска

Содержание NetFRAME 1420

Отзывы:

MPC NetFRAME 1420, Техническое справочное руководство, Страница: 86 / 120

Результаты поиска

Содержание NetFRAME 1420

Отзывы: