MPC NetFRAME 1420 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 120

MPC NetFRAME 1420 Скачать руководство пользователя страница 71

MPC Computers, LLC

NetFRAME 1420

Enabled.

Note: For more information regarding hardware/software support for this function,

please refer to Intel's and Microsoft's web sites.

Processor Power Management (*Available when supported by the CPU.)

This feature allows the user to determine the processor power management mode. If set to C
States only, the processor power will be controlled through CPU power states in the ACPI setting.
Select "GV1/GV3 only" to enable the function of DBS (Demand Based Switching) which will allow
the user to configure CPU power management in the OS. If set to Disabled, C States and
GV1/GV3 are disabled. If set to Enabled, C States and GV1/GV3 are Enabled.

Note: please refer

to Intel's web site for detailed information.

I/O Device Configuration

Access the submenu to make changes to the following settings.

KBC Clock input

This setting allows you to set the clock frequency for the Keyboard Clock. The options are 6MHz,
8MHz, 12 MHz and 16MHz.

Serial Port A

This setting allows you to decide how Serial Port A is controlled. The options are Enabled (user
defined), Disabled, and Auto (BIOS- or OS- controlled).

Base I/O Address

Select the base I/O address for Serial Port A. The options are 3F8, 2F8, 3E8 and 2E8.

Interrupt

Set the Interrupt for Serial Port A. The options are IRQ3 and IRQ4.

Serial Port B

This setting allows you to decide how Serial Port B is controlled. The options are Enabled (user
defined), Disabled, and Auto (BIOS- or OS- controlled).

Mode

This feature allows the user to set the mode for Serial Port B. The options are Normal and IR.

Base I/O Address

Select the base I/O address for Serial Port B. The options are 3F8, 2F8, 3E8 and 2E8.

Interrupt

Set the Interrupt for Serial Port B. The options are IRQ3 and IRQ4.

Parallel Port

This setting allows you to assign control of the Parallel Port. The options are Enabled (user
defined), Disabled, and Auto (BIOS- or OS- controlled).

Base I/O Address

Select the base I/O address for the Parallel Port. The options are 378, 278, and 3BC.

Interrupt

Set the Interrupt for the Parallel Port. The options are IRQ5 and IRQ7.

Mode

This feature allows the user to set the mode for the Parallel Port. The options are Output Only, Bi-
Directional, EPP and ECP.

«
...
69
70
71
72
73
...
»

Содержание NetFRAME 1420

























































































































Отзывы:

Нет отзывов