MPC Computers, LLC
NetFRAME 1420
56
Watch Dog Jumper Settings
Compact Flash Master/Slave
The JP3 jumper allows you to assign either master or slave status to the compact fl ash card,
which plugs into the J4 connector.
Compact Flash Master/Slave Settings
Power Configuration Settings
This section describes features of your system board that deal with power and power settings.
Slow Blinking LED for Suspend-State Indicator
When the CPU goes into a suspend state, the chassis power LED will start blinking to indicate
that the CPU is in suspend mode. When the user presses any key, the CPU will wake-up and the
LED will automatically stop blinking and remain on.
BIOS Support for USB Keyboard
If the USB keyboard is the only keyboard in the system, it keyboard will function like a normal
keyboard during system boot-up.
Main Switch Override Mechanism
When an electrically compliant ATX power supply is used, the power button can function as a
system suspend button. When the user depresses the power button, the system will enter a
SoftOff state. The monitor will be suspended and the hard drive will spin down.
Depressing the power button again will cause the whole system to wake-up. During the SoftOff
state, the electrically compliant ATX power supply provides power to keep the required circuitry in
the system alive. In case the system malfunctions and you want to turn off the power, just
depress and hold the power button for 4 seconds. The power will turn off and no power will be
provided to the system board.
Содержание NetFRAME 1420
Страница 1: ...1 ...
Страница 29: ...MPC Computers LLC NetFRAME 1420 Slide System into Rack ...
Страница 92: ......