MPC NetFRAME 1420, Техническое справочное руководство

Страница: 9 / 120

MPC Computers, LLC NetFRAME 1420
System Safety and Care
Your MPC server has been manufactured to the highest quality standards. With proper care, it
should provide years of trouble-free service. The following sections provide information that will
help ensure your system has the longest life possible:
System Safety
Operating Environment
Cleaning
Protecting
System Safety
The following instructions pertain to the risk of fire, electric shock, or bodily injury. Please read all
of these instructions carefully and save them for later use.
Warning: Keep all packing materials away from children.
Follow all the instructions and warnings marked on this product or included in this manual.
Electrical Safety Precautions
Use the exact type of power cords as required.
Be sure to use power cord(s) that came with safety certifications.
The power cord(s) must be compliant with the AC voltage requirements in your region.
The power cord plug cap must have an electrical current rating that is at least 125% of
the electrical current rating of this product.
Plug the Power cord(s) into a socket that is properly grounded before turning on the
power.
Be aware of the locations of the power on/off switch on the chassis as well as the room's
emergency power-off switch, disconnection switch, or electrical outlet. If an electrical
accident occurs, you can then quickly remove power from the system.
Do not work alone when working with high voltage components.
Power should always be disconnected from the system when removing or installing main
system components, such as the system board, memory modules, and IDE/floppy drives.
When disconnecting power, first power down using the operating system and then unplug
all of the power supply units in the system.
To avoid making a complete circuit, which will cause electric shock, use only one hand
when working with powered-on electrical equipment.
Use extreme caution when using metal tools, which can easily damage any electrical
components or circuit boards.
Do not use mats designed to decrease static electrical discharge as protection from
electrical shock. Instead, use rubber mats that have been specifically designed as
electrical insulators.